How To Use Nginx As Reverse

Nginx is an open source Web server and a reverse proxy server. You can use nginx for a load balancing and/or as a proxy solution to run services from inside those machines through your host’s single public IP address such as In this post, I will explain how to install nginx as reverse proxy server for Apache+php5 domain called www.example.com and Lighttpd static asset domain called static.example.com. You need to type the following commands on vm00having an IP address only.

DNS Setup

Make sure both www.example.com and static.example.com point to public IP address

Install nginx server

Type the following command to install nginx web server:
$ cd /tmp
$ wget http://nginx.org/packages/rhel/6/noarch/RPMS/nginx-release-rhel-6-0.el6.ngx.noarch.rpm
# rpm -iv nginx-release-rhel-6-0.el6.ngx.noarch.rpm
# yum install nginx

Sample outputs:

Loaded plugins: rhnplugin
Setting up Install Process
Resolving Dependencies
--> Running transaction check
---> Package nginx.x86_64 0:1.2.1-1.el6.ngx will be installed
--> Finished Dependency Resolution
Dependencies Resolved
 Package      Arch          Version                   Repository    Size
 nginx        x86_64        1.2.1-1.el6.ngx           nginx        331 k
Transaction Summary
Install       1 Package(s)
Total download size: 331 k
Installed size: 730 k
Is this ok [y/N]: y
Downloading Packages:
nginx-1.2.1-1.el6.ngx.x86_64.rpm                  | 331 kB     00:00
Running rpm_check_debug
Running Transaction Test
Transaction Test Succeeded
Running Transaction
Warning: RPMDB altered outside of yum.
  Installing : nginx-1.2.1-1.el6.ngx.x86_64                          1/1
Thanks for using NGINX!
Check out our community web site:
* http://nginx.org/en/support.html
If you have questions about commercial support for NGINX please visit:
* http://www.nginx.com/support.html
  Verifying  : nginx-1.2.1-1.el6.ngx.x86_64                          1/1
  nginx.x86_64 0:1.2.1-1.el6.ngx

Configure the nginx web server as reverse proxy

Edit /etc/nginx/conf.d/default.conf, enter:
# vi /etc/nginx/conf.d/default.conf
Add/correct as follows:

## Basic reverse proxy server ##
## Apache (vm02) backend for www.example.com ##
upstream apachephp  {
      server; #Apache1

## Lighttpd (vm01) backend for static.example.com ##
upstream lighttpd  {
      server; #Lighttpd1

## Start www.example.com ##
server {
    server_name  www.example.com;

    access_log  /var/log/nginx/log/www.example.access.log  main;
    error_log  /var/log/nginx/log/www.example.error.log;
    root   /usr/share/nginx/html;
    index  index.html index.htm;

    ## send request back to apache1 ##
    location / {
     proxy_pass  http://apachephp;
     proxy_next_upstream error timeout invalid_header http_500 http_502 http_503 http_504;
     proxy_redirect off;
     proxy_buffering off;
     proxy_set_header        Host            $host;
     proxy_set_header        X-Real-IP       $remote_addr;
     proxy_set_header        X-Forwarded-For $proxy_add_x_forwarded_for;
## End www.example.com ##

## START static.example.com ##
server {
   server_name static.example.com;
   access_log  /var/log/nginx/log/static.example.com.access.log  main;
   error_log   /var/log/nginx/log/static.example.com.error.log;
   root        /usr/local/nginx/html;
   index       index.html;

   location / {
        proxy_pass  http://lighttpd;
        proxy_next_upstream error timeout invalid_header http_500 http_502 http_503 http_504;
        proxy_redirect off;
        proxy_buffering off;
        proxy_set_header        Host            static.example.com;
        proxy_set_header        X-Real-IP       $remote_addr;
        proxy_set_header        X-Forwarded-For $proxy_add_x_forwarded_for;
## END static.example.com  ##

Turn on Nginx

Type the following commands:
# chkconfig nginx on
# service nginx start

Configure firewall

Set firewall as follows:

  • Drop all INPUT/OUTPUT chain traffic by default.
  • Only open tcp port and/or 443 on eth0 only.
  • Set eth1 as trusted device so that communication take place between nginx reverse proxy and Apache/Lighttpd backend servers.

Run the following command to set and customize firewall as described above:
# system-config-firewall-tui
You can edit /etc/sysconfig/iptables manually and set the firewall too.


Edit /etc/sysctl.conf as follows:

# Execshild
kernel.exec-shield = 1
kernel.randomize_va_space = 1

# IPv4 settings
net.ipv4.ip_forward = 0
net.ipv4.conf.all.send_redirects = 0
net.ipv4.conf.default.send_redirects = 0
net.ipv4.conf.all.accept_source_route = 0
net.ipv4.conf.all.accept_redirects = 0
net.ipv4.conf.all.secure_redirects = 0
net.ipv4.conf.all.log_martians = 1
net.ipv4.conf.default.accept_source_route = 0
net.ipv4.conf.default.accept_redirects = 0
net.ipv4.conf.default.secure_redirects = 0
net.ipv4.icmp_echo_ignore_broadcasts = 1
net.ipv4.tcp_syncookies = 1
net.ipv4.conf.all.rp_filter = 1
net.ipv4.conf.default.rp_filter = 1

# Increase system file descriptor limit to
fs.file-max = 50000

# Increase system IP port limits
net.ipv4.ip_local_port_range = 2000 65000

# Ipv6
net.ipv6.conf.default.router_solicitations = 0
net.ipv6.conf.default.accept_ra_rtr_pref = 0
net.ipv6.conf.default.accept_ra_pinfo = 0
net.ipv6.conf.default.accept_ra_defrtr = 0
net.ipv6.conf.default.autoconf = 0
net.ipv6.conf.default.dad_transmits = 0
net.ipv6.conf.default.max_addresses = 1

Load new Linux kernel settings, run:
# sysctl -p

Leave a Reply

Your email address will not be published. Required fields are marked *